Ford F-100, F-150, F-250, F-350 Truck Bed Bike Rack

Yes that is correct, Eugene. Since the canister sits flush with the bed rails, you'd effectively have 9" under the canister.

I would be happy to! To flat tow your 2024 GMC Canyon Denali you will need the following parts: Tow Bar and Safety Chains - Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights item #RM-676 Base Plate Kit - Roadmaster Direct-Connect Base Plate…

Yes, the Half Tailgate Pad Bike Rack part #BDW79QB that you referenced does work with your two electric fat bikes.

Yes, the TrackTowers part #Y52AV does fit into Yakima HD tracks like what you have installed on your trailer.

Hey Randy, yes the Inno Tire Hold HD Bike Rack #IN25RR can work to carry bikes with fenders but they would need to be smaller fenders and not the longer ones you sometimes see like on cruiser bikes. Nearly all e-bike fenders will work with this…

For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then…

The 1-Bike Add-On for Thule Bed Rider Pro Truck Bed Bike Rack #TH98YC is meant to fit onto the square bars of the Thule Bed Rider Pro #TH38YC which uses a 30x20mm (1-3/16" x 25/32") square bar. With your bars being…

Yes, it will so long as you have one of the following bike racks Y02473, Y02473-02475, Y02474, and Y02474-02475! The Replacement SpeedKnob for Yakima Dr. Tray Bike Racks item #8880717 fits a mixture of 2" and 1-1/4"…

Hey Michael, thanks for reaching out! The EcoHitch #EH57FR sits a little higher than the Curt #C52NR so it will give you better ground clearance for your 2024 Chevy Silverado 2500. The EcoHitch is a bit more recessed into the front bumper than the…

I spoke with my contact at Kuat and he informed that the Kuat Dirt Bag part #DRT15 is designed to fit axle sizes that are 15 mm x100 mm. To see more dimensions for this product check out the picture I attached.

You can install the bike and rack as you describe, but as a final step, you will need to pull the arm that secures the bike to the carrier toward you until you hear two clicks. This will ensure that the front of the bike tire is tightly held…

Here at etrailer, we strongly recommend not attaching fork mounts to bikes with fenders. We have heard of some horror stories about cracks and damage to bikes with this type of mount. However, bikes can be mounted to the Thule Insta-Gater Pro Truck…